Can Command Strips Work on Acoustic Foam?

Acoustic foam is a popular choice for soundproofing and sound absorption in a variety of settings, including recording studios, home theaters, and other spaces where sound quality is a concern. It is made from a porous material that absorbs sound waves, reducing echo and reverberation in the room.

Read our articles: How Much Acoustic Foams Do You Need? & Do Cheap Acoustic Foam Panels Work?

One popular method for attaching acoustic foam to walls or other surfaces is the use of Command strips, a type of adhesive product produced by 3M.

These strips use a unique adhesive formula that allows them to hold lightweight objects in place without damaging the surface when they are removed.

But do Command strips work on acoustic foam?

Can Command Strips Work on Acoustic Foam?

Weight and Intended Use

First, it’s important to note that Command strips are designed to hold up lightweight objects, such as pictures or small decorations. They are not intended to support the weight of heavier materials like acoustic foam, which can be quite dense.

This means that if you are planning to use Command strips to attach a large piece of acoustic foam to a wall, it may not be the most reliable method.

Read: Where can I buy acoustic foam?

However, if you are only attaching a small piece of foam or need to temporarily hold it in place, Command strips may work well.

Just be aware that the foam may begin to peel off over time, especially if it is subjected to heavy vibration or movement.

Strengthening the Bond

There are a few ways to increase the chances of the Command strips working with acoustic foam:

• Use a stronger version of Command strips, such as the “Extra Strength” or “Large Picture Hanging” strips. These are designed to hold up to 16 pounds or up to 18 pounds, respectively, which is more than enough for most pieces of acoustic foam.
• Use a spray adhesive specifically designed for attaching foam. These products can provide a stronger, more permanent bond and are less likely to fail over time. However, they can be more difficult to remove, so keep that in mind if you are planning to rearrange your foam or move it to a different location.

Consider the type of foam you are using. Some types of foam, such as polyurethane or polyethylene, may be more resistant to adhesives and may require a stronger bonding agent. Other types, such as melamine or polystyrene, may be more susceptible to adhesion and may work better with Command strips or spray adhesive.

Read: Which Acoustic Foam is best? & Is acoustic foam safe?

Factors to Consider

In addition to the adhesive strength, it’s important to consider the size and shape of the foam you are attaching. If the foam is large and flat, it may be more stable when attached with Command strips or adhesive. However, if the foam has a complex shape or is thicker in some areas, it may be more prone to falling off or shifting out of place.

Size and Shape

The size and shape of the foam can also affect the success of using Command strips. If the foam is large and flat, it may be more stable when attached with Command strips or adhesive. However, if the foam has a complex shape or is thicker in some areas, it may be more prone to falling off or shifting out of place.

Vibration and Movement

Another factor to consider is the level of vibration or movement the foam will be subjected to. If the foam is in a location where it will be exposed to heavy vibration or movement.

Read: What Kind of Foam is Acoustic Foam? & How To Make An Acoustic Foam?

Can command strips hold acoustic panels?

Command strips are designed to hold up lightweight objects, such as pictures or small decorations. They are not intended to support the weight of heavier materials like acoustic panels, which can be quite dense. While it is possible to use Command strips to hold up small pieces of acoustic foam, they may not be the most reliable method for attaching larger pieces or for use in situations where the foam will be subjected to heavy vibration or movement.

Can you use command strips on soundproof foam?

Yes, you can use Command strips on soundproof foam. However, as mentioned above, they may not be the most reliable method for attaching larger pieces or for use in situations where the foam will be subjected to heavy vibration or movement. If you do decide to use Command strips on soundproof foam, be sure to choose a stronger version and test the adhesive on a small piece of foam before committing to a larger application.

How do you stick up acoustic foam?

Use adhesive products specifically designed for attaching foam, such as spray adhesive or foam-safe tape. These products can provide a strong, permanent bond and are less likely to fail over time.

Use Command strips or other types of adhesive strips. These can work well for temporarily holding small pieces of foam in place, but may not be as reliable for larger pieces or for use in situations where the foam will be subjected to heavy vibration or movement.

Use mechanical fasteners, such as pins, clips, or screws. These can provide a more secure attachment, but may be more difficult to remove or reposition if needed.

What glue works best on sound foam?

Spray adhesive is often the best choice for attaching sound foam, as it provides a strong, permanent bond and is easy to apply. There are also several foam-safe tapes available that can work well for attaching smaller pieces of foam. However, it’s important to note that some adhesives, including certain types of glue and tape, can potentially damage the foam or affect its ability to absorb sound waves.

What’s the heaviest a command strip can hold?

The weight that a Command strip can hold depends on the type of strip being used. The “Regular Strength” strips are designed to hold up to 4 pounds, while the “Medium Picture Hanging” strips can hold up to 10 pounds. The “Extra Strength” and “Large Picture Hanging” strips are designed to hold up to 16 pounds and 18 pounds, respectively. Keep in mind that these ratings are based on the weight of the object being hung, not the weight of the strip itself.

How do you stick acoustic foam to the wall?

Use adhesive products specifically designed for attaching foam, such as spray adhesive or foam-safe tape. These products can provide a strong

Conclusion

Overall, the success of using Command strips on acoustic foam will depend on a variety of factors, including the size and shape of the foam, the adhesive strength of the strips, and the conditions in which the foam is used. If you do decide to use Command strips, be sure to test the adhesive on a small piece of foam before committing to a larger application, and consider using a stronger version or a spray adhesive specifically designed for foam if you need a more permanent bond.